Anyone making packaging available in Germany has had to deal with two sets of rules since 12 August 2026: the PPWR, the European packaging regulation, and the Verpackungsrecht-Durchführungsgesetz (VerpackDG), the German act that governs its implementation. The old Verpackungsgesetz (VerpackG) of 2017 ceased to apply at the end of 11 August 2026.
The VerpackDG is Article 1 of the act of 13 July 2026 (Federal Law Gazette, BGBl. 2026 I No. 207, issued on 17 July 2026). It applies to all packaging within the scope of the PPWR (§ 1) and uses the PPWR definitions, supplemented by its own (§ 3). The familiar obligations remain: registration in LUCID, the German packaging register, and participation in a dual system, which collects packaging from households. What changes is who has those obligations, and some rules are added. Below are the points that matter for a Dutch company.
New terms: Erzeuger and Hersteller
The VerpackDG follows the German text of the PPWR. In it, the Erzeuger is the manufacturer: whoever makes the packaging or has it made under its own name or trademark. The Hersteller is the producer: whoever first makes the packaging available in Germany and bears extended producer responsibility there. So “Hersteller” does not mean manufacturer here. See roles under the PPWR.
If you supply a German customer that resells, that customer is the Hersteller in Germany. If you supply end users in Germany directly, meaning consumers or companies that use the product themselves, you are the Hersteller there (Article 3(1), point (15), PPWR). Without an establishment in Germany, you then appoint an authorised representative, the Bevollmächtigter, before your first supply, with a written mandate in German. It takes over your obligations, except registration, which remains your own task (§ 5(2) and (4)). See the authorised representative.
Registration in LUCID (§ 6)
Every Hersteller registers with the Zentrale Stelle Verpackungsregister (ZSVR), in the LUCID register, before the first supply (§ 6(1)). In Germany, the ZSVR is also the competent authority for the PPWR register of producers (§ 6(6)). Among other things, you provide (§ 6(2)):
- your company details with your European or national tax number, and a natural person authorised to represent your company;
- the brand names under which you supply in Germany;
- which packaging you supply, broken down into packaging subject to system participation, packaging you must take back yourself (§ 39) and single-use beverage packaging subject to a deposit;
- if you need an authorised representative: its details and the written mandate.
You report changes without delay (§ 6(1)). Without registration you may not supply packaging in Germany (§ 13(1)). Distributors may then not sell your packaging either, and fulfilment service providers may not work for it (§ 13(3) and (4)).
Participation in a dual system (§ 7)
For packaging subject to system participation, you join one or more systems before the first supply, stating material, weight and your registration number (§ 7(1)). Such a system (a dual system) collects the packaging from households and comparable places and has it recovered (§ 3(8)).
Subject to system participation are sales and grouped packaging, primary production packaging and transport packaging that after use mainly ends up as waste at private households or comparable places, plus all service packaging (§ 3(6)). Comparable places include restaurants, canteens, hotels, hospitals, barracks and educational institutions (§ 3(7)). Shipping boxes that reach consumers are therefore included; see PPWR for e-commerce. Reusable packaging in a re-use system and single-use beverage packaging subject to a deposit are not covered (§ 11).
You also report the quantities to the ZSVR (§ 9). If you supplied less than 10 tonnes of packaging subject to system participation in the previous calendar year, one report per year by 1 June is enough (§ 9(2)). Above the thresholds in § 10(4), you also file an annual declaration of completeness (Vollständigkeitserklärung) by 15 May.
Not sure whether this applies to your packaging? The PPWR Check walks through your role, market and material in eight questions and shows per pillar what applies to you. Take the PPWR Check →
Packaging not subject to system participation: take-back and approval
Packaging that does not mainly end up as waste at households or comparable places, such as transport packaging that stays behind in factories and warehouses, you take back free of charge after use at the place of delivery or close by, and you ensure re-use or recycling (§ 39(1) and (3)). With customers that are not consumers, you may agree otherwise on the place and the costs. You document what you supplied, took back and recovered every year by 15 May (§ 39(3)).
New is the approval (Zulassung) by the ZSVR for producers of such packaging (§ 19(1)). Until 31 December 2027 you may still supply without approval (§ 68(9)); from 1 January 2028 you will therefore need one. That is not required if you have transferred your obligations for all your packaging to an approved producer responsibility organisation (§ 19(1) and § 22).
Fines (§ 66)
| Infringement | Fine |
|---|---|
| Not registering, or not correctly or on time (§ 6(1)) | up to €100,000 |
| Supplying without registration or system participation (§ 13) | up to €100,000 |
| Not participating, or not correctly, in a system (§ 7(1)) | up to €200,000 |
| Not reporting changes to your registration, or not on time (§ 6(1)) | up to €10,000 |
The highest amount therefore applies to not participating in a system, not to not registering (§ 66(3)). Fines for infringements of the PPWR itself, such as packaging that does not meet the substance requirements, will only apply in Germany from 12 February 2027 (§ 66(2) and § 68(17)).
Material codes and the reusable alternative
Material codes (§ 4) are voluntary in Germany. If you use them, use only the numbers and abbreviations from Annex 2 of the VerpackDG, such as PP and 5 for polypropylene or PAP and 20 for corrugated board. Other codes for the same materials are not allowed.
Reusable alternative (§§ 60 and 61). If you sell food for immediate consumption in single-use plastic food containers, or drinks in single-use cups, in Germany and fill them only at the point of sale, you must also offer the same in reusable packaging, not at a higher price or on worse terms (§ 60). Businesses with no more than five employees and no more than 80 m² of sales area may instead offer to fill the customer’s own containers; for deliveries, storage and dispatch areas count as sales area (§ 61(1)). That is a lighter way to meet the obligation, not an exemption.
Deadlines
| Date | What | Source |
|---|---|---|
| 12 August 2026 | The VerpackDG applies; the VerpackG has ceased to apply. | Articles 7 and 8 of the act |
| 12 September 2026 | Those who became obliged to register only under the VerpackDG had to register by this date. | § 68(2) |
| 12 November 2026 | Those already registered under the VerpackG make the changes to their registration by this date. | § 68(2) |
| 31 December 2026 | System participations from before 12 August 2026 continue until this date at the latest. | § 68(1) |
| 12 February 2027 | Fines for infringements of the PPWR itself will start to apply. | § 68(17) |
| 1 January 2028 | Approval required for packaging not subject to system participation. | § 19 and § 68(9) |
Those already registered remain registered (§ 68(2)). Check what changes under the new rules: are you still the Hersteller for the same packaging, are the packaging types and brand names correct, and do you need to name an authorised representative (§ 6(2))? Old system participations continue unless agreed otherwise with your system, but no later than 31 December 2026 (§ 68(1)). For 2027 you therefore need a participation under § 7 VerpackDG.
What is not settled yet
The systems must already reward well-recyclable packaging and the use of recycled content in their fees (§ 26(1)). Exactly how, and how you prove recyclability and recycled content, will be laid down by the German environment ministry in a separate regulation, with the consent of the Bundesrat (§ 26a). That regulation does not exist yet, and no draft has been published either. How much recyclability will weigh in your German system fee is therefore not yet fixed in law. Until the European rules on recyclability apply, the ZSVR publishes a minimum standard (Mindeststandard) for recyclability every year by 1 September (§ 26(3)).
What to do now if you supply Germany
- Determine per flow whether you are the Hersteller in Germany. Directly to end users: yes. To a German customer that resells: no, that customer is.
- Update your LUCID registration by 12 November 2026. If you became obliged to register only under the VerpackDG and have not registered yet, do it now: the date for that was 12 September 2026.
- Appoint an authorised representative if you supply end users directly without an establishment in Germany, and name it in LUCID.
- Arrange your system participation for 2027 under § 7 VerpackDG.
- Do you supply packaging not subject to system participation? Arrange the take-back and prepare for the approval you will need from 1 January 2028, or join an approved organisation.
How this relates to the rules in the Netherlands is explained under Netherlands and Germany and EPR registration. The European dates are in the timeline.